Archives

Behind a distinctive double-arched door are unknowns and secrets. While surfing the Internet for examples of spice boxes, I stumbled upon an antique box with a distinctive door. While I’m [...]

Not too big, not too small. This chest is a handy size for a basic set of tools. Editor’s note: This article originally appeared in the June 2009 issue of Popular Woodworking Magazine. It’s [...]

This winged box is turned fast, and the end result will leave people asking how you did that. Project #2504 • Skill Level: Advanced • Time: 4 Hours • Cost: $20 Before beginning this project, I [...]

This small linen chest can be made in batches, and the lid presents some fun challenges during the process. Project #2502 • Skill Level: Intermediate • Time: 2 Days • Cost: $20 Inspiration for a [...]

Adapted from a 19th-century example, this wall-hung shelf is perfect for displaying your treasures.

Finishing it all up. Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 After many hours of meticulous work (see previous entries), I was finally approaching …

Installing the hinges. Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 Most of the time, when building furniture or boxes, I opt for high-quality extruded …

Designing and making the lid cut. Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 Any box designed to house a specific collection item must be …

Wrapping the Brass Strip Around Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 After annealing and straightening the brass and dadoing the sides of the …

Installing the metal band. Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 In the previous chapter of the Megillah Boxes series, I shared the process …

Assembling the Boxes Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 With all the components of the three boxes completed and their joints fitted, I …

Crafting the tops and bottoms of the boxes. Part 1 • Part 2 • Part 3 • Part 4 • Part 5 • Part 6 • Part 7 • Part 8 After milling and beveling (mitering) the long edges of …